How to make PVC Truck Bed Bike Rack | Amazon’s Top Truckbed PVC Bike Rack Picks

Introduction to PVC Truck Bed Bike Rack buying guide

PVC truck bed bike rack are very useful machinery to transport bikes from one place to another. These backs are very well built and have a huge holding capacity. Some of these truck bed bike racks can carry a single bike, while at the same time, some bike racks can carry up to five bikes. These racks are very functional. These PVC bike racks are more efficient than alloy bike racks.

  • They are lightweight, and they help to maintain the color of the truck bed intact.
  • The PVC bike racks are easily adjustable.
  • The straps are very strong, and that helps to hold the bikes intact.
  • PVC material helps to have gentle control over the storage of bikes.
PVC Truck Bed Bike Rack

Are you sure whether the quality of the PVC Truck Bed Bike Rack is good enough? Do you have any confusion about whether to buy this bike rack or not? Are you skeptical about the authenticity of this product? Are you still not convinced about which truck bed bike racks are strong and durable? You should definitely go through this article to solve all your questions and doubts. We are here to help you with that.

PVC

PVC basically stands for Poly Vinyl Chloride and simply it is well known as a plastic. Polyvinyl chloride is produced by polymerization of the vinyl chloride monomer (VCM).

Following article from wikipedia will allow you to go more in deep about PVC.

Wikipedia: PVC Poly Vinyl Chloride

How to make PVC Truck Bed Bike Rack

With this passage we will going to have take a look at the specific system of making a PVC bed bike rack for truck and With instructional exercise and bit by bit data you’ll going to find everything simple.

As primary requirement, The thing you’ll required looks like

🔔 90 degree elbows (Rectangular Frames)
🔔 T connectors/ T Joints (Achieving corners)
🔔 40 ft. of 1 inch schedule 40 PVC
🔔 PVC cement (Using as a gum)
🔔 Plastic spray paint

Let’s move on to step by step procedure to make PVC truck bed bike rack…

Step 1: Measure mark and cut the PVC rack Segment

Using a saw will make the cutting process of PVC rack segment easy. But before that you’ll have to cut long bought PVC pipe into small segments. The mathematical measurement looks like,

  • Four 2 inch (5cm) pipes
  • Four 3 inch (7.6 cm) pipes
  • Eight 24 inch the (61cm) long pipes
  • Two 12 inch (30.5 cm) long pipes
  • Two 36 inch (91.4 cm) long pipes

Step 2: Removing roughness of the pipe by understanding it’s nature

Before doing anything else, Defining whether pipe is durable or non-durable is important. For removal of roughness over the pipe what we are going to do is, Rubbing the sandpaper over the cutting edges of the PVC. If you are using durable PVC, must keep in mind that you’ll going to use a metal file for rubbing. (Sandpaper range between 60-100 grit rating)

Step 3: Cleaning up the pipe for removing the sharpness

After use of sandpaper for the removal of roughness from the pipe, this cleaning matters a lot. Basically process of cleaning is used for removing the sharpness of the pipe and In result for avoiding future injury.

Step 4: Heading towards Truckbed PVC Bike Rack frame assembly

  • By putting in the inner and outer frame together, We can start actual PVC truck bed bike rack assembly.
  • Two 36 in (91.4 cm) long PVC pipe and four 90-degree elbow joint pieces will be required to make proper right and left side of bike rack
  • Using T-connectors to the elbows by using four 4 in (7.6 cm) pipes connection of elbow connector to the T-connector made possible. (the connectors attached maintaining 45 degree angle)
  • Attach first with second and primary 3 inch segment of PVC will be attached to the conncector.
  • Then after we’ll have to insert a 2 inch (5 cm) pipe to the opposite side.
  • By maintaining the 30/35 cm of space between each side, both of the PVC frames placed in opposite ways.

Step 5: finalizing PVC bike rack for truckbed

  • By connecting the two pipes of 24 inch (61 cm) with 90-degree angle at elbow joint from V-shape point, We will put the mounts together.
  • Arrange all in V-shapes, will create the rail bars where bikes are supposed to be parked.
  • Insert bike mounts and then at slanting position install the T-connector.
  • We will put glue, Cement mixture at the end of the PVC segment and Inside of each connector.

Step 6: Painting your favorite colors to the frame

Using spray paint to bike rack, the overall biking and racking experience can be improved. In the end how you appear with this totally handmade PVC truck bed bike rack.

A video might help you: A tutorial by Patrick Parson

PVC Truck Bed Bike Rack

Tailgate Cover/Protection Pads Products for PVC Truck Bed Bike Rack support

If you wish to buy a durable and budget-friendly truck bed bike rack, you should definitely check these products out. These products are manufactured from the most reputed brands, and you can definitely rely on these bike racks without any skepticism. Before buying any truck bed bike rack, you should always check the dimensions of the truck bed and the bike rack.

We have chosen the best ones for you. Do check these products out before they go out of stock from amazon and I hope you have a great shopping experience!

1. INNO RT201 Truck Bed Bike Rack – Bike Mount for Standard Pickup Truck

Check Price

Details:

  • Brand: INNO
  • Color: Black
  • Vehicle Service Type: Truck
  • Material: PVC blend
  • Size: 22 cubic feet
  • Item weight: 4 pounds
  • Item Dimensions LxWxH: 12.5 x 10.3 x 2.7 inches
INNO RT201 Truck Bed Bike Rack - Bike Mount for Standard Pickup Truck

Key Points

  • VERY EASY TO INSTALL : Inno pvc truck bed bike rack is very easy to install. You don’t need any additional man power or help to assemble it. This rack comes with all the hardware and equipments that one needs to assemble this. This does not require any drilling.You don’t have to worry about who will help you with your work.
  • NO EXTRA HUSSLE : You don’t have to remove the front tire of the bike. You can simply attach it without deconstructing the body of the bike. This makes your work all the more easy. You don’t have to do much hard work.
  • COMPATIBLE AND SECURE : This works with almost all types of bikes. You can easily carry any bike in this truck bed bike rack. This is very lightweight and versatile in nature. You can fit any standard or authentic cable lock with this bike rack. Although the cable lock is not included with this bike rack package.
  • INCLUDED IN THE PACKAGE : This package comes with adjustable ratcheting straps. The rods are also adjustable. You can easily increase or decrease the dimensions of this rack.

What We Liked

  • Very well built
  • Great economical
  • Very functional

What cons did we find?

  • Not so safe to use
  • Flimsy clamps

2. MNJ Motor Tailgate Bike Rack 6-Fixed Webbing Straps,Tailgate Cover Pad fit for Most Trunks,Mountain Bikes Frame Protection Pad for 6 Bikes

Check Price

Details:

  • Brand: MNJ 
  • Color: Black
  • Vehicle Service Type: Truck 
  • Material: PVC
  • Item weight: 6.15 pounds
  • Item Dimensions LxWxH: 20 x 6.3 x 20 inches
MNJ Motor Upgraded Tailgate Pad Shuttle Pad for Pickup Truck - Tailgate Protection Pad Transports 2 Bikes with Secure Bike Straps Tool Pocket

Key Points

  • SAFE TO TRANSPORT BIKES : This bike comes with two separate spaces to carry two bikes at a time. The tailgate pads are great for truck beds. They are hassle free and easy to attach and remove.
  • KEEPS THE BIKE INTACT : You can easily attach it using the two straps that the company provides. After attaching the straps, the bikes become intact and safe to use. They keep the bikes in a place and stops them from falling down. This makes transportation very easy and convenient.
  • PROTECTION AND SAFETY : This rack has a coating of flannelette which gives it an additional protection. This enables you to keep the paint of the truck safe for a very long time. It prevents it from scratches. The exterior of the rack is made up of PVC which makes it waterproof, moisture resistant and heat proof.
  • STORAGE POCKET : This rack has one pocket where you can store almost all your tools and instruments. It has a double layer design and it also comes with a zipper and one sticker to protect them from spilling.
  • HUGE SIZE AND LOAD CAPACITY : This bike rack has a huge capacity. You should check the dimensions before purchasing this product. They have a huge load capacity.

What We Liked

  • Quality is great
  • Very sturdy
  • Straps are great

What cons did we find?

  • Poor customer service

3. LEETPIC Tailgate Bike Pads for 61″ Truck Tailgate with Secure Bike Frame Straps Carry up to Six Bikes, Tailgate Protection Pad with Two Tool Packages (Standard) (Reinforced Large)

Check Price

Details:

  • Brand: LEETPIC
  • Color: Black
  • Vehicle Service Type: Truck 
  • Material: PVC
  • Item weight: 6.59 pounds
  • Item Dimensions LxWxH: 18.5 x 16.93 x 6.69 inches
  • Price : $115.95
LEETPIC Tailgate Bike Pads for Pickup Truck Tailgate with Secure Bike Frame Straps, Tailgate Protection Pad for Bike and Truck (Classic)

Key Points

  • HUGE CAPACITY TO HOLD : This bike rack has the capacity to hold almost five bikes at a time. This bike rack comes with straps to hold the bikes firmly to to truck bed. It also helps to ensure the safety and security of the bikes while transportation.
  • SPECIALLY DESIGNED FOR YOUER CONVENIENCE : It has a back openning that helps to access the camera and the handle way too easily. An additionaal velcro hook strap is attached at the back of the bike rack to easily open and close it without completely removing it from the truck bed.
  • THICK LONG LASTING AND WATER RESISTANT MATERIAL : This truck bed bike rack comes with a thickness of 1.5 cm. The PVC material helps to protect the bikes as well as the truck bed. This material makes it waterproof and safe to use.
  • PROTECTIVE PADDING DESIGN : The small protective pads helps to hold the bikes at a place. This helps to keep the bike firm. They do not shake or fall during transportation.
  • COMES WITH TOOL POCKETS : This bike rack comes with two pockets to hold a lot of tools. It has one mesh and one regular pocket.

What We Liked

  • Huge load capacity
  • Water resistant

What cons did we find?

  • Tool pocket is small in size

4. MERCARS Tailgate Pad with Two Tool Pockets for Mountain Bikes, Tailgate Protection Pad with Secure Bike Frame Straps, for Most Large Size Trucks

Check Price

Details:

  • Brand: MERCARS
  • Color: Black
  • Vehicle Service Type: Truck
  • Material: PVC
  • Item weight: 6.69 pounds
  • Item Dimensions LxWxH: 19.25 x 16.4 x 7.25 inches
MERCARS Tailgate Pad with Two Tool Pockets for Mountain Bikes, Tailgate Protection Pad with Secure Bike Frame Straps, for Most Large Size Trucks…

Key Points

  • SIZE : The pvc truck bed bike rack by Mercars is of 62 inches in width. This PVC bike rack is very well made and it is perfect for carrying a lot of bikes.
  • SAFETY AND PROTECTION : This truck bed rack has a very soft lining of flanelette and that thick lining helps to ensure the durability of the color of truck beds and it also protects them from any damage. This is made up of PVC that makes it very strong and sturdy. It also prevents the rack from rain. This is water resistant.
  • HOLDING CAPACITY : This bike rack can hold up to 6 bikes at a time. This helps to keep your bikes in a place and intact. You can use this for tranporting surfboards as well.
  • VERY EASY TO INSTALL : You can easily attach this PVC roof rack by placing it on top of the tailgate and locking the straps on both sides. This rack is open from the front that allows you to open and close the tailgate without much hustle.
  • VERY CONVENIENT TO USE AND STORE : This comes with two pockets that helps you to store tools and equipments inside it without causing any damage to them. It also comes with a protective pad to protect the colour of the truck bed. This rack holds the bike properly without damaging it.

What We Liked

  • Can carry a lot of weight
  • Straps are very strong
  • Safe to use

What cons did we find?

  • Not very easy to install

5. Atliprime Truck Tailgate Pickup Pads 54″ Bike mat with 2 Tool Pockets and 5 Soft Bike Set

Check Price

Details:

  • Brand: ATLIPRIME
  • Color: Black
  • Vehicle Service Type: Truck
  • Material: PVC
  • Item weight: 14.11 pounds
  • Item Dimensions LxWxH: 18.5 x 17.72 x 3.94 inches
atliprime Truck Tailgate Pickup Pads Bike Tailgate Cover for Bicycle Rack with 5 pionts

Key Points

  • HUGE HOLDING CAPACITY : This PVC bike rack can hold five bikes at a time. This bike rack can easily be used to carry bikes as well as surfing boards, kayaks and whatnot. The straps can be easily elongated upto 2 metres which helps you to adjust the size of the rack easily.
  • WATER RESISTANT : This rack comes with a water-resistant quality and it is also used to protect the rack from heat and sun. This rack is anti-tear and anti-scratch. You can easily carry this during any weather or climate.
  • HIGH QUALITY AND STRONG STRAPS : The inside of this PVC rack has a velvet coating which makes it soft from inside. This helps to protect the color of the truck as well as the rack. The durability is also increased due to this additional qualities of this product. This rack comes with straps and you can easily tighten this as per your choice. This maintains the safety of the products as well.
  • WINDOW TO OPERATE : This bike rack has a velcro at the end. The cut out window helps to open the car easily from the tailgate of the truck. You don’t have to remove the rack for opening the bed anymore.
  • ADDITIONAL BAG : This truck bed bike rack has a Teslin soft bag that helps it to store and protect your tools from damage.

What We Liked

  • Fits perfectly
  • High built quality
  • Great price point

What cons did we find?

  • Not suitable for heavy bikes

FAQ’s for best PVC Truck Bed Bike Rack

As we are proceeding forward, We must toss some facts and answers to the questions asked by common consumers. This question answer thing I find as most interesting one as per users perspective ⬇️

1. Are the grippers sold in pairs for one bike or two bikes?

This is sold in a single pair for one bike. You can attach it to your truck bed to stop the bikes from getting damaged or any fragility.

2. What is the size of the threaded spacer rod?

The threaded spacer rod is about 4 to 5 inches long. The size given for PVC Bike Rack for Truck Bed is absolutely perfect.

3. Is this suitable for carrying all carbon bikes?

No absolutely not. The PVC truck bed bike rack might get damaged during an uneven road trip, so It’s better to prefer those carbon bikes at home while we travel with long vacation destinated.

4. Are bike carriers legal?

Carrying empty bike carriers is illegal.

Whereas a standard metal rack requires the installation of welds, a custom made PVC one requires the installation of fittings. PVC fittings are generally made from either brass or stainless steel

5. How do you put a bike in a truck bed?

PVC Truck Bed Bike Rack is the only complete solution for storing and securing your bicycles in the bed of your pick up or SUV. Simply remove two of the included plastic pins, insert them into the holes in the top of your vehicle’s cargo bed rails, then slip the bicycle carrier over the pins.

You must lock the carrier into place with the included pin lock and you’re ready to go. The included keylock allows you to secure your bicycles to the carrier even when you are not around.

6. Can you open the boot with a rear mounted bike rack?

Commonly saying, opening the boot with a rear mounted bike rack is an impossible task to go on with. Once the bike installed on a tow point of mounted rack, It’s done further modifications are not possible at all.

Hence, we have chosen the best truck bed bike racks for you. The selected PVC truck bed bike rack are very economical and come with several additional features which make them very safe to use. You can easily install and remove it at your convenience. The PVC coating act as a laminated coating which you can use it in any weather type.

Wrapping up: How to make PVC Truck Bed Bike Rack

PVC Truck Bed Bike Racks are perfect for truck bed because most commonly they have safety pads to protect the color of the truck and keep the bikes safe. These bike racks have varied load capacities. You can attach two bikes to almost five bikes at a time. They help to keep the bikes intact. These racks have some pockets as well. You can easily carry many tools in those pockets.

We will be happy to hear your thoughts

Leave a reply

Best Roof Box Guide
Logo
Enable registration in settings - general